[Fot] Float needle valves

[Phil Gott]

Thanks, Erik and Joe;
Good to know.
I’ve had Gross Jets hang open with some royal flooding. Won’t use those again!
Phil

Sent from my iPhone

> On Mar 17, 2021, at 11:19 AM, Erik Jacobsen <kekjacobsen at yahoo.com> wrote:
> 
> 
> Phil,
> I use the plain old solid needles in both street and race cars and haven't had any issues. They do wear out eventually, but after 7 years in the race car, I still haven't had a problem.
> 
> Jake
> 
> On Wednesday, March 17, 2021, 10:13:30 AM CDT, Joe Boruch via Fot <fot at autox.team.net> wrote:
> 
> 
> Phil, years ago I stopped using Gross Jets, which have the spring loaded ball on the end of the float needle.  I suspected some flow issues and others had said that they had issues.  JoeB
> 
> On Wednesday, March 17, 2021, 08:16:11 AM EDT, Phil Gott via Fot <fot at autox.team.net> wrote:
> 
> 
> Anyone have experience with needle valves that do not have the spring loaded contact where the needle valve rests on the float? Is a solid one better, worse, or require different set up?
> Phil Gott
> 
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jaboruch@yahoo.com
> 
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/kekjacobsen@yahoo.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210317/7c90679a/attachment-0003.htm>