[Fot] DCOE choke tubes

[McKearn McKearn]

So to answer my own question, it appears that the choke tubes with no holes
for the idle air ballance circuit work perfectly in the newer style dcoe's
..I just turned the screws in till they touched the choke tubes, tightened
the lock nuts and put the rest together. It runs very well..

                    P.J.

On Thu, Jun 17, 2021 at 8:50 AM McKearn McKearn <mckearn2 at gmail.com> wrote:

> Hi all.
>  I am switching over to a newer set of webers on GT6 and would like to use
> the choke tubes from the old carbs. Problem is there are no holes for the
> idle air screws. Can I get away with just drilling new holes in the chokes
> / not worry about putting any holes in the chokes and don't use the idle
> air adjust or Plan C ??
>                                        Thanks P.J.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210618/d2ac71f2/attachment-0003.htm>