[Fot] Brake Disc & Caliper Cold Air Ducting?

[Mike Granat]

That is excellent advice and a good 'heads up'. Tony applied that
methodology to the brakes on my +4 racer and the results were quite
surprising. I guess we all assume that brakes always overheat... getting
the brakes right is gratifying.

On Mon, Jan 4, 2021, 6:33 PM Tony and Annie Garmey via Fot <
fot at autox.team.net> wrote:

> Well , before you “ think” you need brake cooling .... you need to know
> the facts that suit your needs.
>
> All brake pads operate within a temperature range. Most problems occur
> with the pad running tooo cold . Same with brake fluid!
>
> Is that looong pedal pad fade or Fluid boil ?
>
> Highly recommend using temperature paint on the rotor and caliper. Know
> your facts !!
>
> My 2 cents
> T
>
>
>
> Sent from my iPhone
>
> > On Jan 4, 2021, at 6:07 PM, Joe Alexander via Fot <fot at autox.team.net>
> wrote:
> >
> > Hello!
> >
> > Anybody using any ducting to brake calipers and discs?
> >
> > Could you share your experiences?
> >
> > Thanks,
> >
> > Joe Alexander
> > 4505 Donald Dr
> > Cedar Falls, IA 50613
> > The-vintage-racer.com
> > Gasketinnovations.com
> > Cell:  319.464.4711
> >
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/horizonracing@msn.com
> >
> >
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/mikegranat9@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210105/b04f5bfb/attachment-0003.htm>