[Fot] Intake/Exhaust manifold gasket

[Michael Moore]

I have not had those problems with the high-performance set, but I don’t reuse them.

I have not used Remflex, the they say they can be reused. But they are not cheap, that’s why I but a lot of the one Moss sells.

http://catalog.remflex.com/TRIUMPH_Exhaust_Gasket_p/20-001.htm


Thanks
Mike

Michael T. Moore, CPA
3255 West 26th Street
Erie, PA 16506

Phone:  814-616-8652  ext 100
Fax:        888-865-5279
Email:    mmoore at mtmcpafirm.com

This electronic mail message contains confidential and legally privileged information intended only for the use of the recipient. If the reader of this message is not the intended recipient, the reader is hereby notified that any dissemination, distribution, copying or other use of this message is strictly prohibited and is hereby instructed to notify the sender immediately by return email and destroy this copy of this message.



-----Original Message-----
From: Fot <fot-bounces at autox.team.net> On Behalf Of R. John Lye via Fot
Sent: Tuesday, February 2, 2021 3:14 PM
To: fot at autox.team.net
Subject: [Fot] Intake/Exhaust manifold gasket

Hi all,

I have recently had to install and remove a header several times for my TR-3A, and discovered that the Moss Motors "high performance" intake/exhaust manifold gasket had disintegrated, despite not having even started the engine yet.  So, I am looking for suggestions for a better solution.  Any thoughts or suggestions?
Thanks in advance.
 

--
Thanks,
John

rjl6n at cstone.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/mmoore@mtmcpafirm.com