[Fot] Intake/Exhaust manifold gasket

[vfracing at aol.com]

Yes, they are pretty much a one-time gasket due to their sandwich type construction.  But they do work well under hi temp use.
I'd like to find a source as Moss and TRF were out of them last time I checked....
Phil Gott


-----Original Message-----
From: John Linney via Fot <fot at autox.team.net>
To: R. John Lye <rjl6n at cstone.net>
Cc: fot at autox.team.net
Sent: Tue, Feb 2, 2021 3:21 pm
Subject: Re: [Fot] Intake/Exhaust manifold gasket

I got mine from The Roadster Factory and it’s been great, though I suspect they aren’t meant to be reused as they crush to achieve their seal.

> On Feb 2, 2021, at 12:13 PM, R. John Lye via Fot <fot at autox.team.net> wrote:
> 
> Hi all,
> 
> I have recently had to install and remove a header several times for my TR-3A,
> and discovered that the Moss Motors "high performance" intake/exhaust manifold
> gasket had disintegrated, despite not having even started the engine yet.  So, I am
> looking for suggestions for a better solution.  Any thoughts or suggestions?
> Thanks in advance.
>  
> 
> --
> Thanks,
> John
> 
> rjl6n at cstone.net
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/john@linneyweb.com
> 
> 

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210202/0e1a0ac7/attachment-0003.htm>