[Fot] (no subject)

[Mordy Dunst]

Hi those intake/ exhaust gaskets the hp are made for one time use.  Once torqued up they’re done.  You can smear a little motor oil on their surface prior to assembly. 


Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com
 On Tuesday, February 2, 2021, R. John Lye via Fot <fot at autox.team.net> wrote:

Hi all,

I have recently had to install and remove a header several times for my TR-3A,
and discovered that the Moss Motors "high performance" intake/exhaust manifold
gasket had disintegrated, despite not having even started the engine yet.  So, I am
looking for suggestions for a better solution.  Any thoughts or suggestions?
Thanks in advance.
 

--
Thanks,
John

rjl6n at cstone.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gasket.works@gte.net



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210202/f6b19a0b/attachment-0002.htm>