[Fot] TR6 Oiling

[Jason Sukey]

Jake,
I'm not aware of any off the shelf options.  For my setup, I use 1/8 NPT to
dash 4 AN fittings in the front two main bearing feeds in the block.  These
go back to a "Tee" bolted to where the coil was originally mounted, fed by
a dash 6 AN line tapped into the oil filter adapter.  This has worked
quite well for me.

Others go full external feed to all of the mains, I know that also works
well.

Jason Sukey

On Tue, Dec 28, 2021 at 8:44 AM Erik Jacobsen via Fot <fot at autox.team.net>
wrote:

> Good morning FoT!
> Karen and I are going through her TR6 race engine and we'd like to run
> supplemental, external oiling to the front of the cam (per Kas' books).
> Does anyone have a pre-made set-up for this? Alternately, what size
> fittings and lines are needed? I can certainly machine a splitter, and
> assemble all the bits, but I thought I'd see if there was an easier way.
>
> Thanks much!
> Jake Jacobsen
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/jsukey@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211228/1720fafb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20211228_133450.jpg
Type: image/jpeg
Size: 409948 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20211228/1720fafb/attachment.jpg>