[Fot] Has anybody put a TR4 tub on a TR6 chassis?

[Jack Wheeler]

 I put a TR-3 body on a TR-4A frame to build a race car.  I had to cut off the widest part of the frame (just in front of the rear wheels) to get it under the TR-3 body, but otherwise, i seem to recall it bolted right up.  But, that was almost 40 years ago, so my memory is a little fuzzy.  I used the TR-4A frame because I wanted the adjustable front suspension.  Under the SCCA rules at that time, I couldn't use the IRS under a TR-3.  So, I used a TR-4 solid axle mounted with a 4 link system and coil over shocks.  Don't know if this helps, but that is what I did.
Jack

    On Wednesday, June 3, 2020, 7:57:04 AM EDT, yellow04 <yellow04 at tr4racer.com> wrote:  
 
 I figured this was the place to ask this question.

I am selling an early TR4 project/parts car on Craigslist and just got a 
question that I can't answer. Will a TR4 tub that goes on the ladder 
frame mount to an IRS wishbone frame?

Thanks.

Henry
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200603/eeaa6039/attachment-0003.htm>