[Fot] 25th Anniversary of the FOT 2021

Thu Dec 31 07:31:51 MST 2020

All you poor people that didn't grow up with a family go-kart track...Karting Kettle, Elkhart Lake...my Grandpa built that....Sorry, not sorry!!!KarenSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Erik Jacobsen via Fot <fot at autox.team.net> Date: 12/31/20  8:24 AM  (GMT-06:00) To: fot at autox.team.net, garygret at sbcglobal.net, fubog1 <fubog1 at aol.com> Subject: Re: [Fot] 25th Anniversary of the FOT 2021 
        I was allowed to use the engine from our mower in my go-kart during the week as long as I re-installed it on the mower Friday night, so I could mow Saturday. All was good until I got ahold of some nitromethane from a drag racer friend around the corner... BTW, 10% is fine in a 4hp Briggs, 20% not so much. Apparently pistons are only supposed to have the one hole for the gudgeon pin! Jake

                    On Thursday, December 31, 2020, 08:16:46 AM CST, fubog1 via Fot <fot at autox.team.net> wrote:

                Ok so how many others used to get up extra early on trash pickup day and scour the neighborhood for junk reel lawnmowers ?
Glen

-----Original Message-----
From: Duncan Charlton via Fot <fot at autox.team.net>
To: Gary Schneider <garygret at sbcglobal.net>
Cc: fot at autox.team.net <fot at autox.team.net>; fubog1 <fubog1 at aol.com>
Sent: Thu, Dec 31, 2020 8:38 am
Subject: Re: [Fot] 25th Anniversary of the FOT 2021

I discovered the same as Gary did with the Tecumseh engine on my Rupp go-kart when I was 13 or 14.  After about a year of this the flywheel exploded, with the heavy magnet portion deciding to end its union with the rest of the lump.  I felt a big impact behind my right shoulder just before the engine suddenly lost power.  I was damned lucky that the chunk with the magnet (which must have weighed 2 or 3 lbs.) bounced off the steel tubing supporting the edge of the sheet metal seat pan, saving me from a serious injury.  I found the piece about 30 feet away in the grass.

Duncan

On Wed, Dec 30, 2020 at 10:39 PM Gary Schneider via Fot <fot at autox.team.net> wrote:

Glen, that's great! My dad built me a go-kart out of plywood and an old reel lawnmower when I was around that size or a little bigger. I discovered my first speed mod: it went lots faster if you tied a string to the throttle and pulled it open past the governor. Turned out not for very long though, a big BANG clang-a-lang-a-lang after a few hot laps of the yard. My first motorized device and the first engine I blew up. Ungrateful little hellion. Fortunately there was no photographic evidence or body cams to capture the guilty look.

Gary Schneider

                    On Wednesday, December 30, 2020, 9:13:16 AM CST, fubog1 via Fot <fot at autox.team.net> wrote:

 Yes, yes, and yes.

Glen Efinger

ps- here's my picture in advance, the 1st racecar I ever built, my brother John is driver.

-

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com

_______________________________________________fot at autox.team.nethttp://www.fot-racing.comDonate: http://www.team.net/donate.htmlArchive: http://autox.team.net/archive http://www.team.net/pipermail/fotUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com

_______________________________________________fot at autox.team.nethttp://www.fot-racing.comDonate: http://www.team.net/donate.htmlArchive: http://autox.team.net/archive http://www.team.net/pipermail/fotUnsubscribe/Manage: http://autox.team.net/mailman/options/fot/kekjacobsen@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20201231/0bc945c2/attachment.htm>