[Fot] TR3 front apron help

Greg Blake gblake58tr3 at icloud.com
Mon Aug 24 19:32:55 MDT 2020


Folks. Need some help with the shape of the lower section (below the grill opening) of the front apron on a large mouth TR3. I cut up and welded new metal on the front of the race car and I’m pretty sure it is no where near the stock profile. 

My 14 year old son and I are rebuilding his 3 and it has obviously met a few curbs in it day. The lower section is folded back and I don’t have a good goby to make templates. 

Can one of you fellow 3 care takers send us a to scale profile of that lower section?  I think one for middle and one for each side just inside the bumper plinths would get us close enough. I’d really appreciate the help, so would Will the owner. 

Attached is a photo of Will working the rear corner that had 1/2” of bondo when we stepped the car.  He is grinding off the remnants of the studs he used to pull the dent  properly  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 615881 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20200824/23f6eafc/attachment-0002.jpeg>
-------------- next part --------------
 

Thanks. 

Greg

Sent from my iPhone


More information about the Fot mailing list