[Fot] TR6 inner shaft bearing

[Jay Galbreath]

Hah!  I just attempted that this week. The two stub shafts would NOT press
out even with 10 tons and red hot from my firewrench. Scott Harper at Team
Triumph came to my rescue and went through his stash to find a couple that
did press out for him. So give him a call if you can't break them apart.
Good Luck!  Jay     WPTA

On Sat, Apr 11, 2020 at 6:22 PM Michael Deweerd via Fot <fot at autox.team.net>
wrote:

> Amici
> How much force is typically required to separate the driving flange from
> the shaft
>
> --
> *Mike Deweerd*
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/tr4jay@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200411/ea9926f2/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 60833538733__170635DE-43AC-436F-9B31-D1CB800D472A.jpeg
Type: image/jpeg
Size: 2574955 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20200411/ea9926f2/attachment-0003.jpeg>