[Fot] tr-6 rod bearings

[Brad Eells]

They are King tri-metal bearings made in Israel. 

I used them in the Spitfire and will give Tony’s fancy coating next time around.

Brad Eells
Sent from my iPhone

> On Jun 26, 2019, at 7:37 PM, Tony Drews via Fot <fot at autox.team.net> wrote:
> 
> For the TR-4 (race engine) I do the Tri-Metal bearings (rod and main) from www.bpnorthwest.com.  I also have them ceramic coated by Calico coatings.  I've not had issues due to the bearing / coating in 15+ years of hard racing.  
> 
> I know you're asking for the TR-6 - they have tri-metal for that too.  Of course I have no direct experience on the 6 cylinder motor.
> 
> Regards, Tony Drews
> 
>> On 6/26/2019 8:39 PM, CHARLES KENT via Fot wrote:
>> Hi, I have finally depleted my stash of vandervell bearings. I was wondering if there are suggestions from the group regarding the best choice of today's suppliers. Any input based on race engine use would certainly be appreciated. thanks!
>> 
>> 
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>> 
>> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190626/29088025/attachment-0001.htm>