[Fot] tr-6 rod bearings

[Tony Drews]

For the TR-4 (race engine) I do the Tri-Metal bearings (rod and main) 
from www.bpnorthwest.com.  I also have them ceramic coated by Calico 
coatings.  I've not had issues due to the bearing / coating in 15+ years 
of hard racing.

I know you're asking for the TR-6 - they have tri-metal for that too.  
Of course I have no direct experience on the 6 cylinder motor.

Regards, Tony Drews

On 6/26/2019 8:39 PM, CHARLES KENT via Fot wrote:
>
> Hi, I have finally depleted my stash of vandervell bearings. I was 
> wondering if there are suggestions from the group regarding the best 
> choice of today's suppliers. Any input based on race engine use would 
> certainly be appreciated. thanks!
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190626/7c5fb29a/attachment-0001.htm>