[Fot] Competition Valve Cover Fastener-Redesign

[Joe Alexander]

Thank you. The silicone gaskets are amazing. 

Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613

Gasketinnovations.com
Cell:  319.464.4711

> On Mar 27, 2018, at 4:54 PM, Richard Kristoff <rek46 at aol.com> wrote:
> 
> I have some knurled keepers....and the silicone gaskets are awesome...both flat and recess type....great for racing,no leaks...last forever....Rick
> 
> In a message dated 3/27/2018 5:24:26 PM Eastern Standard Time, fot at autox.team.net writes:
> 
> Introduction of new Design.
> 
> The Triumph Factory made up some knurled aluminum valve cover fasteners in the 50s for their competition cars. Allows quick remove and replace of valve covers. We added an O ring seal feature for oil control in the design.
> 
> The first configuration is generic to most TR models, the second configuration is dedicated to the TR6 with engraving and lacquer fill. Looks good, too.
> 
> Accepting orders with no charge for shipping to FOT. Shipping starts next week. Offer good for one week...until next Tuesday.
> $15 each Fastener for generic TR. (except GT6)
> $20 each fastener for TR6
> 
> PayPal = n197tr4 at cs.com
> 
> Might be a good time to get the reusable silicone gasket that is superior in sealing. Discounted to $15.....regardless of model.
> 
> 
> 
> 
> Or available at Moss, very soon.
> 
> Thanks,
> 
> 4505 Donald Dr
> Cedar Falls, IA 50613
> 
> Gasketinnovations.com
> Cell: 319.464.4711_______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rek46@aol.com
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180327/f6431315/attachment-0001.htm>