[Fot] Competition Valve Cover Fastener-Redesign

[Richard Kristoff]

I have some knurled keepers....and the silicone gaskets are awesome...both flat and recess type....great for racing,no leaks...last forever....Rick
 
In a message dated 3/27/2018 5:24:26 PM Eastern Standard Time, fot at autox.team.net writes:

 
 Introduction of new Design.

The Triumph Factory made up some knurled aluminum valve cover fasteners in the 50s for their competition cars. Allows quick remove and replace of valve covers. We added an O ring seal feature for oil control in the design.

The first configuration is generic to most TR models, the second configuration is dedicated to the TR6 with engraving and lacquer fill. Looks good, too.

Accepting orders with no charge for shipping to FOT. Shipping starts next week. Offer good for one week...until next Tuesday.
$15 each Fastener for generic TR. (except GT6)
$20 each fastener for TR6

PayPal = n197tr4 at cs.com

Might be a good time to get the reusable silicone gasket that is superior in sealing. Discounted to $15.....regardless of model.




Or available at Moss, very soon.

Thanks,

4505 Donald Dr
Cedar Falls, IA 50613

Gasketinnovations.com
Cell: 319.464.4711_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rek46@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180327/b19d6d28/attachment-0001.htm>