[Fot] Panasport Wheel Question...

Sat Jun 2 15:36:08 MDT 2018

Have you looked into ROTA wheels? Made in the Phillipines as I understand it. Economical and nice looking wheels. Not sure of sizes or widths.
Good luck, Bill
  ----- Original Message ----- 
  From: Terry Stetler via Fot 
  To: Friends of Triumph 
  Sent: Saturday, June 02, 2018 1:53 PM
  Subject: [Fot] Panasport Wheel Question...

  Folks,

  I am considering replacing the old 15x6 Revolution wheels on my street TR3.    The 6” width is just a bit much for the old girl and I have to run ¼ inch spacers to clear some various bits on the inside of the fender wells.   They were originally for TR6s as I recall, and I purchased them from American Revolution decades ago on close out.

  So I’m thinking about going to the 5.5” Panasports as the are the narrowest allow wheel I know of currently on the market.   

  My question is, will the Panasports work with the stock TR3 wheel studs?   My TR3 is strictly a street car and so I do not run the big Moroso wheel studs like the competition cars do.

  I wish there was a 5” wide wheel, but that is not the case.   Also wondering about tires.   I want to stick with 165-15s as they are the correct size and fit under the fenders as they should, trouble is there are so few good tires in that size anymore.  Only ones I am aware of that are remotely good are the Vredestein Sprints,  any others worth a look?

  Thanks.

  Terry Stetler 

  Sent from Mail for Windows 10

------------------------------------------------------------------------------

  _______________________________________________
  fot at autox.team.net

  http://www.fot-racing.com

  Donate: http://www.team.net/donate.html
  Archive: http://www.team.net/pipermail/fot
  Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180602/e74db02d/attachment-0001.htm>