[Fot] Oil Cooler or Oil filter first?

[Phil Gott]

Filter first. Keeps the crud out of the cooker. Coolers are hard to clean. Good thought By Glen to replace the cooker on engine refreshing. 
With a cooler in the system, also a good idea to prelube the engine with an Accusump upon cold start. Oil cooler lines are long and may drain upon standing a while.

Sent from my iPhone

> On Dec 3, 2018, at 7:02 AM, fubog1 via Fot <fot at autox.team.net> wrote:
> 
> I typically run an inspectable (Oberg) out of the engine before the cooler, and a second filter after the cooler.
> It may be overkill but it eliminates the possibility of oil cooler trash getting in the engine.
> I also replace the cooler @ every engine freshen-up.
> Glen
> 
> 
> -----Original Message-----
> From: Bud Rolofson via Fot <fot at autox.team.net>
> -To: FOT <fot at autox.team.net>
> Sent: Mon, Dec 3, 2018 2:51 am
> Subject: [Fot] Oil Cooler or Oil filter first?
> 
> Listerati,
> 
> For those of you running a remote oil cooler and remote oil filter do you run the hose coming OUT of the engine into the cooler first or the filter first? Just wanted to see how and why (if there’s a reason) most run their lines.
> 
> Thanks
> Bud
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20181203/03240e8a/attachment-0001.htm>