[Fot] 89MM piston question

[van.mulders.marcel at telenet.be]

Bob, 
It is definitely necessary to make that modification to the liners. The relieve should correspond to the shape of the combustion chambers : about 4 mm wide on a 89mm engine. 
Marcel 


Van: "fot" <fot at autox.team.net> 
Cc: "fot" <fot at autox.team.net> 
Verzonden: Donderdag 30 augustus 2018 00:05:43 
Onderwerp: [Fot] 89MM piston question 

Do the guys running the 89MM pistons and liners need to relieve the liners to clear the intake valve, or does the extra MM make the difference? 

Bob Kramer 

On Tue, 

_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/pipermail/fot 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180831/7a11dd8d/attachment-0001.htm>