[Fot] Triumph TR pinion height

[John Styduhar]

See if you can find and download the document "Six Tech" by Leonard
Runkenberger.  Contains a chapter on rear end setup for TR6 including info
on pinion depth.  I can email you the pdf otherwise.

On Tue, Mar 28, 2017 at 5:12 PM, Robert Lang via Fot <fot at autox.team.net>
wrote:

> Hi,
>
> Absent the official tool for setting the pinion height, is there an actual
> number published any where?
>
> Else, is there a tool that you can buy that can be adapted to set up TR
> diffs?
>
> I set up a 3.70 last year and I might have set the pinion head too high...
> I'm actually not sure if that's the case, I threw in a user R&P - it might
> have been worn before. Not sure.
>
> But I have a couple of new gears sets that I want to get right and I don't
> really feel like installing / measuring / removing / shimming ad nauseam to
> get the pattern perfect. I also don't want to muck up the new gears. ;-)
>
> Regards,
> Bob Lang
> 339-927-4489 <(339)%20927-4489>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/johnstydo at gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170328/8649c498/attachment-0001.htm>