[Fot] TR type A OD

[Larry Young]

There are also the articles at the vtr.org maintenance pages. We give 
the more traditional procedure to remove it from the gearbox first. I 
haven't done one in a while, but I suspect the friction lining is stuck 
to the brake ring.
  - Larry

On 12/24/2017 6:59 AM, EDWARD WOODS via Fot wrote:
> Greg,
>
> You're not using the excellent article on the A type overdrive found on the Buckeye Triumphs technical site.
>
> Ed Woods
>> On December 23, 2017 at 10:50 PM Greg Blake via Fot <fot at autox.team.net> wrote:
>>
>>
>> I am attempting to rebuild an A type OD over the holiday weekend. I tried to separate the rear OD housing from the main OD housing after removing the rear output flange and speedo drive. Once i removed the 6 nuts and washers, I had to tap the studs with a brass drift to get the rear housing to separate from the main housing. But now i can't get the rear OD housing to come completely off. I can get about a 1/4" gap between the rear and main housing but it won't come all the way off. What am I doing wrong?
>>
>> Thanks. Greg
>>
>> Sent from my iPhone
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fogbro1@comcast.net
>>
>>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/cartravel@pobox.com
>
>
>