[Fot] Clevite rod bearings

[My apologies for not informing you sooner.]

Hello All,
 
BFE has the STD and .010 in Stock for those interested.
 

Brian Howlett
British Frame and Engine
626-419-2786
bfeparts at aol.com


 
 
-----Original Message-----
From: JIm Gray via Fot <fot at autox.team.net>
To: fot <fot at autox.team.net>
Sent: Tue, Apr 25, 2017 8:28 am
Subject: [Fot] Clevite rod bearings



It looks like Mahle/Clevite are going to discontinue them at least on the standard bearing size.
Any suggestions on an alternate? I run the Tri-metal mains. I need to get two sets, one standard and one
.010 under so I can get some measurements. I have a crank that's right on the edge of running a standard
bearing but I won't know for sure until I can measure the ID's with bearings in place.
Thanks for the input as always,
Jim Gray



_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bfeparts@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20170425/fc2111a6/attachment-0001.htm>