[Fot] Spitfire cylinder head - which is best?

[fubog1]

That's the best combination, valves, ports, thick casting, if the rules allow of course...
Glen 
 

 

 

-----Original Message-----
From: Joe Curry <spitlist at cox.net>
To: don <don at dcphotos.com>; fot <fot at autox.team.net>
Sent: Sat, Sep 3, 2016 2:42 am
Subject: Re: [Fot] Spitfire cylinder head - which is best?

I am using one of the early 1500 heads with the larger valves cut down for
my small journal 1296.  It breathes a lot better than the other options.

Joe C.

Sent from my HAL-9000
-----Original Message-----
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of don at dcphotos.com
Sent: Friday, September 02, 2016 1:42 PM
To: fot at autox.team.net
Subject: [Fot] Spitfire cylinder head - which is best?

Greetings, 
Somewhere, sometime ago, I read one cylinder head casting number for a
Spitfire 1300/1500 was made of better metal than the others?
Don't know if there is any truth to this or not and, of course, now I can't
find that info anywhere.

Anyone here know?

Don
DON COUCH PHOTOGRAPHY
(512)-680-3540

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/spitlist@cox.net



_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160903/dba67ba4/attachment-0001.htm>