[Fot] TR4 valve springs for .549 lift ?

[Jason Ostrowski]

There's Tony Winning yet another race.
The guy is tough to beat I tell you.

Jason Ostrowski
Friendly Ghost Racing
1969 Triumph GT6+ Racecars

On Mon, Nov 14, 2016 at 1:03 PM, <toodamnfunky at comcast.net> wrote:

> I was just waiting to hear which email address he prefers. Looks like you
> got it first.
> jim
>
> ------------------------------
> *From: *"Tony Drews" <tony at tonydrews.com>
> *To: *"Jim Gray" <toodamnfunky at comcast.net>, "fot" <fot at autox.team.net>
> *Sent: *Monday, November 14, 2016 11:37:54 AM
> *Subject: *RE: [Fot] TR4 valve springs for .549 lift ?
>
>
> Just ordered some parts from Brian at BFE, he indicated that he would
> like to join this list.  I asked him about e-mail address and this one:
> bfeparts at aol.com
> is the one he'd like to use.
>
> I'll gladly second the nomination.
>
> Mark, can you add Brian Howlett?
>
> Regards, Tony Drews
>
> At 06:37 PM 11/13/2016, Jim Gray wrote:
> >Brian Howlett at BFE confirmed his Comp isky springs work at .549. On that
> >note Brian is in business as BFE and  fully operational. He's raced a TR4
> >powered Morgan for 45+ years
> >And really knows these motors.
> >Is Brian a member ?? If not I'd like to nominate him.
> >Jim G.
> >
> >-----Original Message-----
> >From: Tony Drews [mailto:tony at tonydrews.com]
> >Sent: Saturday, November 12, 2016 3:18 PM
> >To: toodamnfunky at comcast.net; fot <fot at autox.team.net>
> >Subject: Re: [Fot] TR4 valve springs for .549 lift ?
> >
> >That seems about what I'm running for lift.  I'm running springs from BFE
> >and they don't bind.  They seem close to the TR-4 springs sold by Crower
> - I
> >ended up with Crower titanium retainers when BFE went offline (it's back
> >under new ownership).  Isky also has a spring set for TR-4, not sure if
> >those support that lift but I'm guessing they do.
> >
> >www.BritishFrameandEngine.com / BFEparts at aol.com
> >
> >Regards, Tony
> >
> >At 12:52 PM 11/10/2016, toodamnfunky at comcast.net wrote:
> > >FoT,
> > >I'm changing cam spec this year and the new cam will lift at the valve
> > >to .549.
> > >Can anyone suggest a source for valve springs that will work with .549 ?
> > >_______________________________________________
> > >fot at autox.team.net
> > >
> > >http://www.fot-racing.com
> > >
> > >Donate: http://www.team.net/donate.html
> > >Archive: http://www.team.net/archive
> > >Forums: http://www.team.net/forums
> > >Unsubscribe/Manage:
> > >http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason@
> multivintage.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20161114/8adc46b3/attachment-0001.htm>