[Fot] TR6 flywheel

[McKearn McKearn]

Thanks for the information. That's exactly what I'm looking for.
                                P.J.

On Mon, May 16, 2016 at 8:04 AM, dustin nicholson <nicholsondustin at yahoo.com
> wrote:

> P.J.,
>
> Yes the fly wheel offset is different from the earlier to later cars, I
> don't know when the change happened but one flywheel is basically flat and
> the other is dished in the middle.  Going off of memory I'd say the offset
> is a half inch maybe a little more.
>
> Dusty
>
> --------------------------------------------
> On Sat, 5/14/16, McKearn McKearn <mckearn2 at gmail.com> wrote:
>
>  Subject: [Fot] TR6 flywheel
>  To: "FOT list" <fot at autox.team.net>
>  Date: Saturday, May 14, 2016, 11:21 PM
>
>  Hi All. Can
>  anyone tell me what the difference is in the flywheels of a
>  TR250 and early TR6 (69) vs. the later TR6s?  I know the
>  crankshaft rear ends were different lengths but are the
>  flywheel offsets different also?   I'm trying to figure
>  out what I have.
>         Thanks. P.J.
>  -----Inline Attachment Follows-----
>
>  _______________________________________________
>  fot at autox.team.net
>
>  http://www.fot-racing.com
>
>  Donate: http://www.team.net/donate.html
>  Archive: http://www.team.net/archive
>  Forums: http://www.team.net/forums
>  Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/nicholsondustin@yahoo.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160517/c76696f3/attachment-0001.htm>