[Fot] Front main bearing cap

[John Styduhar]

Bill, call Scott Harper, owner of Team Triumph in Warren Ohio at
330-392-7176 for the main cap.

On Tue, May 10, 2016 at 3:53 AM, Marcel Van Mulders <
van.mulders.marcel at telenet.be> wrote:

>
> Bill,
> I once had a warped rear main bearing cap because of a broken crankshaft.
> It
> had been repaired by making the bearing cap a little bit shorter and then
> line boring the main bearing 'gallery'.
> Marcel
> -----Oorspronkelijk bericht-----
> Van: Fot [mailto:fot-bounces at autox.team.net] Namens Bill Babcock
> Verzonden: maandag 9 mei 2016 22:41
> Aan: FOT Triumph
> Onderwerp: [Fot] Front main bearing cap
>
> Anyone have one they could sell me? I'm tearing down one of peyote's engine
> and found the front cap cracked in half. It was holding the crank in fine,
> the bearing and crank look perfect, but it was broken in place. I used to
> have a spare block I could have robbed, but can't find it.
>
> I assume a good machine shop can grind the joint face bore the ting round
> to
> spec. Anyone done this before? Any problems or suggestions?
>
> Bill
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
>
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160510/8a3997cb/attachment-0001.htm>