[Fot] Oil sump baffle

[Allen Washatko]

Tim,
Is this a horizontal crank scraper? If so, I have the same setup on the new oil sump. I'm concerned about loss of oil pressure in corners since there is no vertical baffle.
Allen

Sent from my iPhone

> On May 2, 2016, at 2:43 PM, <timmmurphh at gmail.com> <timmmurphh at gmail.com> wrote:
> 
> We have the larger aluminum oil pan on the TR4.  It takes 8 quarts to fill
> on an oil change.  The baffle has a flange on it that goes between the pan
> and the block.  So we have the pan, a gasket, the baffle flange, another
> gasket and then the block.  Sort or a pain to clean it all up on engine
> rebuilds and reassemble it all, but it works.
> 
> Tim Murphy
> 1961 TR4 #317  BRG
> 
> -----Original Message-----
> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Allen Washatko
> Sent: Sunday, May 1, 2016 7:02 PM
> To: FOT <fot at autox.team.net>
> Subject: [Fot] Oil sump baffle
> 
> Anyone running a larger capacity aluminum oil sump? Are you using any type
> of baffling and if so, how did you attach it?
> Thanks,
> Allen
> TR6 - #6
> 
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/timmmurphh@gmail.com
> 
> 
>