[Fot] Timing my cam

[Duncan Charlton]

I’m not sure what you mean by “set the cam.”  

This describes the centerline method of degreeing a cam:
http://www.hotrod.com/how-to/engine/116-0701-how-to-degree-a-camshaft/ 

while this other web page describes the valve open/close timing method:

http://www.lunatipower.com/Tech/Cams/HowToDegreeACam.aspx 

or -- if these are not replying to your question this video might answer your question:

http://tinyurl.com/hsf3dnx

Duncan


>> Bill Babcock got this started for me.  Just had a new cam
>> ground.Exhaust is at 112 degrees, intake at 104; lobe center angle is
>> 108.   Do I set the cam when intake is a maximum lift to 104 or 108
>> After TDC?
>> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com
> 
> 

Duncan Charlton
Elgin, Texas USA