[Fot] Tr3/4 rod bearings

[Jim Gray]

Ken G got me hooked on the Clevite 77's. They are made for the jag 4.2L and
now I get them from Summit. I've been told you can get them in .001
increments but haven't followed up on it yet.

I get them coated locally. I'm freshening up the bottom end with a new set
next week.

Jim g

 

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Tony Drews
Sent: Thursday, July 7, 2016 9:54 PM
To: Mordy Dunst <gasket.works at gte.net>; fot at autox.team.net
Subject: Re: [Fot] Tr3/4 rod bearings

 

Tri-metal from BP Northwest, coated by Calico coatings.
http://www.bpnorthwest.com/triumph/tr3-tr4-tr4a/engine-main-components/beari
ng-tri-metal-hd-connnecting-rod-tr3-tr4a.html
http://www.calicocoatings.com/

Tony Drews

At 05:55 PM 7/3/2016, Mordy Dunst wrote:



If you have this motor type what bearing are you using?


MDunst
Headgasket.com <http://headgasket.com> 
626.358.1616 <tel:626.358.1616>  T
626.628.3777 <tel:626.628.3777>  F
Triple R Munitions, Inc
626.201.9471 <tel:626.201.9471>  T
FFL 6,7 SOT 2


_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com <http://www.fot-racing.com/> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160709/51908e60/attachment-0001.htm>