[Fot] TR6 Crankshaft/Flywheel

[Charly]

Early flywheel

On Sat 09/01/16  9:42 PM , Charly charly at mitchelplumbing.com sent:
> P. J.
> the early TR6 and TR250 crankshaft have a longer end on them making the
> flywheel shorter and if I remember correctly, dished as well. I also believe the early flywheels may
> have been heavier. The clutches and transmissions are completely interchangeable, but the
> flywheels are not, a long end crankshaft must be used with the proper flywheel. 
> Hope this helps.
> Charly Mitchel 
> TR6 #44
> 
> On Sat 09/01/16  8:38 PM , McKearn McKearn mckearn2 at g
> mail.com sent:> Hello again.  Can anyone enlighten me as to
> the differences in the> early TR6 crankshaft and flywheel
> arrangement vs. the later> crankshaft. I believe the earlier engines have a
> shorter hub so are> the flywheels different between the
> two>
> also?           &nbs
> p;            &
> nbsp;          > Thanks.  P.J.
> > 
> 
> _______________________________________________
> fot at autox.
> team.net
> http://www.fot-racing.com
> Donate: http://www.team.net/donate.htmlArchive: http://www.team.net/archiveForums: http://www.team.net/forumsUnsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/ch
> arly at mitchelplumbing.com
> 
> 
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Apr07002.JPG
Type: image/jpeg
Size: 597365 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20160110/e8871547/attachment-0003.jpe>