[Fot] TR6 Crankshaft/Flywheel

[Charly]

P. J.
the early TR6 and TR250 crankshaft have a longer end on them making the flywheel shorter and if I 
remember correctly, dished as well. I also believe the early flywheels may have been heavier. The 
clutches and transmissions are completely interchangeable, but the flywheels are not, a long end 
crankshaft must be used with the proper flywheel. 
Hope this helps.
Charly Mitchel 
TR6 #44

On Sat 09/01/16  8:38 PM , McKearn McKearn mckearn2 at gmail.com sent:
> Hello again.  Can anyone enlighten me as to the differences in the
> early TR6 crankshaft and flywheel arrangement vs. the later
> crankshaft. I believe the earlier engines have a shorter hub so are
> the flywheels different between the two
> also?                                   
> Thanks.  P.J.
>