[Fot] GT6 scatter shield?

[Kas Kastner]

I made the shields out of that material for several cars and it works great.

*Never be beaten by equipment.*

On Thu, Feb 4, 2016 at 11:39 AM, Steven Belfer <steve at artwithcars.com>
wrote:

> Here's mine. It's made of conveyer belt type material.
>
>
> ~Steve
>
>
> > On Feb 4, 2016, at 10:15 AM, <rkramer3 at austin.rr.com> <
> rkramer3 at austin.rr.com> wrote:
> >
> > Here is a really simple version that came on my TR4A. I believe this was
> 1960's fabrication. Mounts to the frame and to the floor.
> >
> > Bob Kramer
> > rkramer3 at austin.rr.com
> >
> > ---- Ted Schumacher <tedtsimx at bright.net> wrote:
> >> Brian & list. Easy to make and easy to remove. Bend a piece of 1/8"
> >> steel in a curve to fit over the bellhousing and down to frame rail.
> >> Since bellhousing is tapered to the rear, cut off ends of bent piece so
> >> it allows shield to follow taper of bellhousing and ends to sit flat on
> >> frame rail. Mark the location of bellhousing to engine bolts and drill
> >> oversize holes in shield so an extension and socket can reach the bolt
> >> heads.  Cut 2 pieces of 1" angle iron the length of the shield as it
> >> sits on frame rail. Drill 2 holes into each side of scatter shield and
> >> matching holes in angle iron.  Weld nuts to inside of angle iron.  Bolt
> >> shield to angle iron and place on frame. Adjust position until it seats
> >> nicely with adequate clearance.  Mark position on frame rails and weld
> >> into place. You know have an easily removable scatter shield, easy
> >> access to transmission mounting bolts if you want to pull engine with
> >> out removing gearbox and no need to try and hold a nut and bolt in
> >> place.  Grab your ratchet and go. Ted
> >>
> >>> On 2/3/2016 1:59 PM, Brian Schirano wrote:
> >>> Hi All
> >>>
> >>> Question for GT6ers. What are you using for a scatter shield? I need
> >>> to do something and am thinking about a generic kevlar blanket for
> >>> lack of knowledge / better idea
> >>>
> >>> Love to know
> >>>
> >>> Thanks
> >>> Brian
> >>> 26A GT6+, 28 TR6
> >>> Brian Schirano
> >>> 585-305-0349 Cell
> >>> BSchirano at yahoo.com
> >
> > <TR4A 314.jpg>
> > <TR4A 313.jpg>
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/steve@artwithcars.com
> >
> >
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/kaskastner@gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160204/1c242e5d/attachment-0001.htm>