[Fot] Rear diff seal

[Bob Kramer]

Great point Glen. I always use a razor blade to open up the holes so the gasket sits flat on its own as a first step.

Sent from my iPhone

> On Aug 25, 2016, at 4:56 PM, fubog1 <fubog1 at aol.com> wrote:
> 
> Todd it shouldn't leak. You could try it again and just tighten the bolts loosely to hold it in place and wait awhile before tightening.
> Another thing I have found is some of the replacement gaskets are junk and will split at the bolt holes when the bolts are tightened,
> HTH
> Glen
> 
> 
> 
> -----Original Message-----
> From: Todd Redmond <alfetta95 at optonline.net>
> To: fot <fot at autox.team.net>
> Sent: Thu, Aug 25, 2016 5:44 pm
> Subject: [Fot] Rear diff seal
> 
> Friends 
> Twice now I've installed the diff cover and out oil in it. And it's dripped out. I've straightened all the flanges, bolt holes, removed all old gaskets and gunk. Still leaks. Is there a problem using black Permetex on both mating surfaces along with the paper gasket? 
> 
> Thanks
> Todd Redmond
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160826/7a2e2ceb/attachment-0001.htm>