[Fot] Crank Nitriding

[Joe Alexander]

I have been there...good people and knowledgeable. Dave had a long term relationship with Vizard.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Apr 4, 2016, at 2:43 PM, Allen Washatko <awashatko at wi.rr.com> wrote:
> 
> My TR6 crank was nitrided by APT Racing Parts located in Riverside, CA. Never a problem. Crank has seen 8,000 rpm.
> Allen
> 
> Sent from my iPhone
> 
>> On Apr 4, 2016, at 1:11 PM, Robert Lang <robertlangtr6 at yahoo.com> wrote:
>> 
>> Hi,
>> 
>> I found a shop to nitride a TR6 crank, the folks there indicate that the core crank material must be able to withstand 930 degrees F...
>> 
>> I presume "yes", but materials science is not a strong point for me.
>> 
>> Anyone care to chime in?
>> 
>> Regards,
>> Bob Lang
>> 339-927-4489
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko@wi.rr.com
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160404/b7c54287/attachment-0001.htm>