[Fot] Crank Nitriding

[Allen Washatko]

My TR6 crank was nitrided by APT Racing Parts located in Riverside, CA. Never a problem. Crank has seen 8,000 rpm.
Allen

Sent from my iPhone

> On Apr 4, 2016, at 1:11 PM, Robert Lang <robertlangtr6 at yahoo.com> wrote:
> 
> Hi,
> 
> I found a shop to nitride a TR6 crank, the folks there indicate that the core crank material must be able to withstand 930 degrees F...
> 
> I presume "yes", but materials science is not a strong point for me.
> 
> Anyone care to chime in?
> 
> Regards,
> Bob Lang
> 339-927-4489
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/awashatko@wi.rr.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160404/33eaf410/attachment-0001.htm>