[Fot] TR3 clutch

[J.C. Hassall]

Dave,
I use the TR4A clutch and PP (the diaphragm type), which has held up well.

WRT the hardened pin, drill the fork and shaft to insert a 0.25 hardened bolt.
ISTR that the procedure is described on the Buckeye Triumphs site.  If you
can't find it, let me know

Jim

Fat-thumbed from my iPhone

> On Oct 20, 2014, at 1:31 PM, David Kettler <dkettler1 at charter.net> wrote:
>
> I have a friend who does Auto X in his TR3.  He is looking for a clutch
assembly that is less prone to slipping than the stock setup.  He has also
broken the hardened pins holding the clutch fork to the shaft.
>
> Any recommendations?
>
> Thanks
>
> Dave Kettler
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhassall@gmail.com