[Fot] Lifters

[MadMarx]

You are very true.
And I was really doubting that these would work but they all look great.
So far as good - next year of racing on it.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: Dean Tetterton [mailto:tr3a58 at verizon.net]
Gesendet: Donnerstag, 3. April 2014 00:06
An: MadMarx
Cc: 'Fot'
Betreff: Re: [Fot] Lifters

I don't know where I learned this, but I was taught that Triumph cams &
Lifters should be flat. This is because the lifter bores are at an angle to
the cam lobe. This causes the lifters to spin in the bore.
Anybody else know if this is true?

I think this is still true in the TR6 block.

Dean T.


On Apr 2, 2014, at 5:17 PM, MadMarx wrote:

> https://lh5.googleusercontent.com/-moHnemvOoI0/UJfrIMoHBbI/AAAAAAAACDg
> /D0qVv
> xgpRpA/w798-h809-no/DSC02992.JPG