[Fot] Lifters

[Dean Tetterton]

I don't know where I learned this, but I was taught that Triumph cams
& Lifters should be flat. This is because the lifter bores are at an
angle to the cam lobe. This causes the lifters to spin in the bore.
Anybody else know if this is true?

I think this is still true in the TR6 block.

Dean T.


On Apr 2, 2014, at 5:17 PM, MadMarx wrote:

>
https://lh5.googleusercontent.com/-moHnemvOoI0/UJfrIMoHBbI/AAAAAAAACDg/D0qVv
> xgpRpA/w798-h809-no/DSC02992.JPG