[Fot] Brake pads don't fit

[john hasty]

We use Carbotech in my TR3A race car as well.  Be sure and tell Mike
(704-481-8554) they are for your TR3 so they won't make them too thick as
used in some of the NASCAR applications.  My part # is CTGD500-AX6.  He has
a record under my name as to the correct thickness.....


John H. Hasty
Attorney At Law
Guthrie, Davis, Henderson & Staton, P.L.L.C.
719 East Boulevard
Charlotte, North Carolina 28203-5113
Tele: (704) 372-5600
Fax: (704) 372-4601
E-mail: jhhasty at gdhs.com
www.gdhs.com
 
PRIVILEGE AND CONFIDENTIALITY NOTICE:  This message (and any attachments) is
intended only for the use of the addressee and may contain information that
is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please erase all copies of the message
and its attachments and notify us immediately.  Thank you.
 
IRS CIRCULAR 230 NOTICE:  In order to comply with certain IRS regulations
regarding tax advice, we inform you that, unless expressly stated otherwise,
any tax advice contained in this communication (including any attachments)
is not intended or written to be used, and cannot be used, for purposes of
(i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
marketing or recommending to another party any transaction or matter
addressed herein.
-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Tony Drews
Sent: Thursday, May 23, 2013 12:38 PM
To: davehogye; Fot at autox.team.net
Subject: Re: [Fot] Brake pads don't fit

It's not uncommon to have to shim the caliper to center it up.  For racing,
I recommend Carbotech, AX6 compound (www.ctbrakes.com ).  We didn't like the
Hawke Blue's much - needed warmup or they locked easily, were hard on the
rotors and left little bits of molten rotor stuck in the paint of the wheel.

Cheers, Tony

At 11:32 AM 5/23/2013, davehogye wrote:
>Hello friends,
>I've been driving my TR3 on the street with Hawk blue pads and have put 
>over 500 miles on them now. They make a mess of dust all over and 
>they've been squealing like crazy driving around town between stops 
>sometimes. I ordered a set of performance street pads from Moss and the 
>outside pad will not fit in the caliper. It's obvious that the rotor is 
>not centered in the caliper, but the Hawk pads went in no problem, so I 
>hadn't noticed the offset until trying to fit other pads. I got another 
>set of street pads, thinking the Moss pads where fat and same problem.
>I have TR3 uprights, TR4A-TR6 caliper carriers and new, not 
>remanufactured, calipers from BPNorthwest and new aluminum hubs. I 
>called BPN thinking the caliper might be the problem and they have had 
>no other calls on this. Perhaps the hub dimensions are off. I guess 
>I'll have to shave the outside pads to fit them, but has anyone else 
>come across this issue. I'll be measuring things and hopefully find out 
>what's going on, but it looks like at least .050"
>will have to come off the pad.
>
>
>Thanks,
>Dave
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com