[Fot] aftermarket crank dampeners and pullies for TR4's

[Dan Cronin]

ATI part numbers for TR 2,3 and 4 are:  918569 for the AL. shell @ around $425
and 916789 for the crankshaft hub @ around $125 from ATI  Summit and Jegs may
also carry these units.

On Dec 3, 2013, at 3:34 PM, Dan Cronin wrote:

They can be purchased directly from the folks at ATI, thats where I got mine
s
couple of years ago.

On Dec 3, 2013, at 1:14 PM, toodamnfunky at comcast.net wrote:

FoT

I have the Moss B= pulley and belt conversion with the rubber joint on the
crank pulley/dampener.

Kas warned me at Elkhart lake that these can separate and with that I would
like to explore higher quality

crank dampeners. We installed an ATI super damper on Mark Edenbs car and
there are three things about it I donbt like.

  1. Cost + $ 500.00
  2. They are not clocked correctly for the TR4 and a new timing pointer
needs to be fitted in a less than ideal position.
  3. With the engine installed there is only B<b clearance to the steering
rack.



B

So with that I have been looking at OEM and aftermarket dampeners/balancers
for other cars but I just donbt know

enough about machining to determine if it would be worth trying to machine a
balancer from another make to fit the TR4.

B

While on the subject of pullies in general Ibm wondering what others have
done with non-Triumph parts.

I would prefer a serpentine belt. I know I could fit a good quality tensioner
but still stuck on fitting non-triumph pullies

to the TR-4.

Can anyone advise on this subject ?

Thanks,

jim g
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/adcronin@mi.rr.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/adcronin@mi.rr.com