[Fot] Transmission Question

[Larry Young]

Jason, I have taken that outer nut off, double nutted it and tried to 
turn the stud.  I cannot get it to budge. How do you get it out?  I'm 
not clear about how that part goes together, since that is not something 
I ever bother with during a rebuild. It looks like it has threads on 
both ends with a shoulder in the center.

Unless I can get that stud out, I can only think of getting the shaft 
lose at the back ot the tranny and sliding it out to engage the reverse 
gear.  That would mean taking the OD off the back or at least creating 
enough separation to losen the screw that locks the reverse shaft and 
lay shaft in position.

I repeat, engagement in the top cover is easy and not my problem.
Larry

On 6/25/2012 6:16 PM, Jason Ostrowski wrote:
> Larry,
> I think you may be able to fix it by just taking of the top cover off.
> Speaking of the Gt6 box: I have fixed both of those problems with the 
> trans in the car. The side stud definitely... One time, that side stud 
> you speak of with the nyloc nut, just fell out during a race. I drove 
> home and stole one out of my dad's trans, replaced it, refilled the 
> fluid... and raced the next day. A good flashlight, tiny hands and 
> lots of patience are needed but it can be done...