[Fot] So Cal Machine Shop Recommendation

[Robert MacKenzie]

There is only one place to go:  
Costa Mesa R&D
123 Monte Vista Avenue,   Costa Mesa, CA 92627
(949) 631-6376
John Edwards


John is an amazing machinist who actually wrote the book on how to re-build
engines.  John is also famous for his YouTube videos under the name of
"fiatnutz" where he showcases some the innovative methods he had developed
over the years.
Additionally he has developed a custom bee-hive valve spring for use on
Spitfire race engines.  I have them on one of my heads and he can put them
on you GT6 head as well.

Some videos for Triumphs:
Spitfire Bee-hive springs: http://www.youtube.com/watch?v=oLlY0sTYYBY
Bee-hive spring retainer mods: http://www.youtube.com/watch?v=oTjApt0hOlk
Spitfire con rod mods: http://www.youtube.com/watch?v=Z-RkCY4Gl9c
Rocker Arm Rebuilding for the Triumph Spitfire :
http://www.youtube.com/watch?v=7APJucC0RD0


I can't say enough good things about John and his work.

Robert MacKenzie


-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Kurt Oblinger
Sent: Thursday, December 27, 2012 12:18 PM
To: 'Friends of Triumph'
Subject: [Fot] So Cal Machine Shop Recommendation

Looking for recommendations for machine work for a GT6 engine. Just typical
rebuild work; clean the block, check the crank bore and align bore if
needed, turn the crank, balance, etc, etc. Prefer the So. Bay, Redondo,
Torrance area or possibly Long Beach.

TIA,
Kurt Oblinger
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/list@mackenzie.aero