[Fot] So Cal Machine Shop Recommendation

[Bobby Whitehead]

also on the hunt for a machine shop that can do the long line boring procedure 
to allow cam bearings for the GT6...

Bobby




________________________________
From: Kurt Oblinger <koblinger at verizon.net>
To: Friends of Triumph <fot at autox.team.net>
Sent: Thu, December 27, 2012 12:19:19 PM
Subject: [Fot] So Cal Machine Shop Recommendation

Looking for recommendations for machine work for a GT6 engine. Just typical 
rebuild work; clean the block, check the crank bore and align bore if needed, 
turn the crank, balance, etc, etc. Prefer the So. Bay, Redondo, Torrance area or 
possibly Long Beach.

TIA,
Kurt Oblinger
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/igofaster@att.net