[Fot] TR3 and Southwick conversion

[davehogye]

Thanks for the comments and information regarding TR3s and Southwick axle conversions. 
I have been educated as to what problems might occur when changing the TR3s axle length. The most important issue is what's legal according to the rules in your particular race group. In my case, the stock length must be retained, but for others racing TR3s, a little extra axle length might be a reasonable modification to consider. 
It has been brought to my attention, that Southwick could lengthen the TR3 axle conversion as much as the tubes will allow and if a U bolt is provided, they will perform any needed grinding, all for no additional cost. 
Thanks again, 
Dave Hogye