[Fot] TR3 and Southwick Conversion

[Larry Young]

I used large U-bolts as well.

On 2/1/2011 11:23 AM, Steven Belfer wrote:
> I have the Southwick conversion on my TR3 with the stock-length axle 
> tubes.  There plates were ground down a bit to fit over the flange.  
> It gets thin in places.  Also, the guy who performed the conversion 
> used U-bolts of different diameters so that the outer's are thinner to 
> make a better fit over the flange.
>
> ~Steve
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/cartravel@pobox.com