[Fot] Clutch throw out bearing sleeves for TR3/TR4

[fogbro1 at comcast.net]

Tim,



No, the diaphragm clutch requires a shorter transmission nose piece.



Ed



----- Original Message -----


From: "Tim Murphy" <timmurph at fastbytes.com>
To: fot at autox.team.net
Sent: Wednesday, August 24, 2011 1:50:49 PM
Subject: [Fot] Clutch throw out bearing sleeves for TR3/TR4

Are the clutch throw out bearing sleeves for the TR2 to early TR4's with the
"three finger" style pressure plates which use the "flat" face throw out
bearings interchangeable with the clutch throw out bearing sleeves for the
later TR4, TR4A and TR6's with the "diaphragm" style pressure plates which
use the "conical" or "spherical" face throw out bearings?

B 

Thanks,

Tim