[Fot] Carrillo TR3-4 rods torquing

Spitfire Racing Spitfire_Racing at twcny.rr.com
Mon Aug 15 15:31:19 MDT 2011


Typically Carillo rods have the bolts torque based on stretch. At least in
Spitfires that's the way it is. Had to buy another gadget but all went well
after a little sweat and nerves. I suggest you contact Carillo, their tech
guys are real helpful and there's probably no better resource for your
question. I bought the stretch gauge at Summit Racing. I can send a picture
if you need and probably their part number.

Russ Moore
Spitfire #49

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Alexandre Camoletti
Sent: Monday, August 15, 2011 5:04 PM
To: fot at autox.team.net
Subject: [Fot] Carrillo TR3-4 rods torquing

Amici ! Currently building a TR3/4 engine with Carrillo rods. 

The set came with the stock Carrillo bolts (called by them WMC/H11) and the
tech sheet says they must be torqued max 40lbs.

While the stock rods and bolts usually are torqued at 60 lbs.

So should I torque the Carrillos at 40 or 60 lbs then ?

Amici, thank you for your very valuable input (as always)!

Cheers

Alex
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/spitfire_racing@twcny.rr.com



More information about the Fot mailing list