[Fot] HS6 carb hesitation TR4

[Mark Pendergrass]

The float bowls that i have , have a center bolt to hold the cap on , this 
allows me to position the float arms any which way. Also prior owners put 
the rear carb bowl to the front of the carb( so both float bowls are to the 
right looking at the throats) for whatever reason . These carbs  also vented 
to the wheelhouse ............Mark P
----- Original Message ----- 
From: "Bob Kramer" <rkramer3 at austin.rr.com>
To: <tylerpthompson at yahoo.com>
Cc: "Irv Korey" <ikorey at comcast.net>; "Triumph Friends of" 
<fot at autox.team.net>
Sent: Thursday, June 24, 2010 6:22 PM
Subject: Re: [Fot] HS6 carb hesitation TR4


>I think the Volvo HS6 top work. I've bought a bunch of these over the years 
>and converted them to TR4 spec. TR4 HS6's are expensive but you can buy a 
>pair of Volvo's for $50 sometimes.
>
>
> Bob Kramer
> Volente, TX
>
> Perfection is not attainable, but if we chase perfection we can catch 
> excellence.
> Vince Lombardi
> ----- Original Message ----- 
> From: <tylerpthompson at yahoo.com>
> To: "Irv Korey" <ikorey at comcast.net>; <emanteno at gmail.com>
> Cc: <fot-bounces at autox.team.net>; "Triumph Friends of" 
> <fot at autox.team.net>
> Sent: Thursday, June 24, 2010 6:52 PM
> Subject: Re: [Fot] HS6 carb hesitation TR4
>
>
>> Joe Curto is going to see if he has other tops to address this issue.
>>
>> If not, he indicated he has seen some racers remove the ears on the tops 
>> and use large washers to hold the tops down.
>> Ty
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net