[Fot] Flywheel Bolt Locking Plates

[MadMarx]

We call this silicon remover which you use for cleaning a surface before
starting the paint job.
It does remove sticker glue also very nicely. But it is not rough to paint.
I'm not sure if it does remove Loctite out of a thread.


-----Urspr|ngliche Nachricht-----
Von: Joe Curry [mailto:spitlist at cox.net]
Gesendet: Freitag, 23. Juli 2010 02:17
An: 'Jerry Van Vlack'; 'Tim Murphy'; 'MadMarx'; fot at autox.team.net
Betreff: RE: [Fot] Flywheel Bolt Locking Plates

I just discovered that Paint prep cleaner (such as Acryli-Clean) works well
for getting gasket sealer off.  I discovered this due to finding that a
bottle of Permatex Gasket sealer turned over in my toolbox leaving a real
mess.  I scraped off the bulk of it but was able to dissolve the remainder
with that solvent without causing ill effects to my skin.

Joe

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Jerry Van Vlack
Sent: Thursday, July 22, 2010 4:01 PM
To: Tim Murphy; 'MadMarx'; fot at autox.team.net
Subject: Re: [Fot] Flywheel Bolt Locking Plates

Lacquer thinner seems to clean anything but it's rough on the skin. That's
what I was going to use. Gasket cleaner may well be Lacquer thinner as I've
used thinner to clean gasket surfaces and it works well.
JVV
----- Original Message -----
From: "Tim Murphy" <timmurph at fastbytes.com>
To: "'MadMarx'" <tr4racing at googlemail.com>; <fot at autox.team.net>
Sent: Thursday, July 22, 2010 5:39 PM
Subject: Re: [Fot] Flywheel Bolt Locking Plates


> Thanks Chris, I've been using lacquer thinner and a brass gun cleaning
> brush
> on a drill along with dental picks to clean the Loctite out of the
> threads.
> I'll try the gasket remover next time.
>
> Tim
>
> -----Original Message-----
> From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
> Behalf Of MadMarx
> Sent: Thursday, July 22, 2010 2:32 PM
> To: fot at autox.team.net
> Subject: Re: [Fot] Flywheel Bolt Locking Plates
>
> Gasket remover will clean the bolts and holes from old Loctite.
>
>
> -----Urspr|ngliche Nachricht-----
> Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
> Auftrag von WEmery7451 at aol.com
> Gesendet: Donnerstag, 22. Juli 2010 18:48
> An: jerryvv at roadrunner.com; fot at autox.team.net
> Betreff: Re: [Fot] Flywheel Bolt Locking Plates
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net