[Fot] TR3 Diff shim thickness

[Bob]

I think it may be stamped on the pinion gear.

Bob

On 7/13/2010 11:22 PM, Joseph Siam wrote:
> I have a customers rear end at a rear end shop and they are having a tough time setting up the pinion bearing depth.  The owner took it all apart and had it powder coated and tossed out the shims so no starting point for the rear end shop.  Any one have any good starting point.    Thanks   Joe
>
> Chequered Flag Racing .net
> Joseph P. Siam
> 9833 Deering Ave unit I
> Chatsworth Ca 91311
> 818 350 6222
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com