[Fot] TR3 Diff shim thickness

[Bill Babcock]

Try starting with a customer that doesn't have his head up his butt.

Really though, there was an exhaustive thread on setting up rear ends in the
dim past. I'd search the digest.

On Jul 13, 2010, at 8:22 PM, Joseph Siam wrote:

> I have a customers rear end at a rear end shop and they are having a tough
time setting up the pinion bearing depth.  The owner took it all apart and had
it powder coated and tossed out the shims so no starting point for the rear
end shop.  Any one have any good starting point.    Thanks   Joe
>
> Chequered Flag Racing .net
> Joseph P. Siam
> 9833 Deering Ave unit I
> Chatsworth Ca 91311
> 818 350 6222
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com